Good brakes, the fewer accidentsCategory: Automotive
Article posted by: Elva Zhang
A brake is a device for slowing or stopping the motion of a machine or vehicle, or alternatively a device to restrain it from starting to move again. The kinetic energy lost by the moving part is usually translated to heat by friction. Alternatively, in regenerative braking, much of the energy is recovered and stored in a flywheel, capacitor or turned into alternating current by an alternator, then rectified and stored in a battery for later use. The development of the car’s braking system is a very important phase in the automotive business. The car brakes are very important because they assure the driver that they control something as big and as fast as the car by making it stop with just one foot. Today, car brakes have gone far to the electronic braking systems, and it looks like they are not only performing well on the road, but in the market too. According to a study called Global market review of electronic braking systems, one of the main reasons why this technology grew is because they were preferred over anti-lock braking system (including http://www.made-in-china.com/Auto-Parts-Accessories-Catalog/Brake.html , http://www.made-in-china.com/products-search/hot-china-products/Brake_Pads.html , http://www.made-in-china.com/products-search/hot-china-products/Brake_Drum.html.
An anti-lock braking system (ABS) (translated from German, Anti-Blockier System) is a safety system on motor vehicles which prevents the wheels from locking while braking. A rotating road wheel allows the driver to maintain steering control under heavy braking, by preventing a locked wheel or skid, and allowing the wheel to continue to forward roll and create lateral control, as directed by driver steering inputs. Disadvantages of the system include increased braking distances under some limited circumstances (ice, snow, gravel, "soft" surfaces), and the creation of a "false sense of security" among drivers who do not understand the operation, and limitations of ABS.
Anti-lock braking systems were first developed for aircraft in 1929, by the French automobile and aircraft pioneer, Gabriel Voisin, as threshold braking an airplane is nearly impossible. An early system was Dunlop's Maxaret system, introduced in the 1950s and still in use on some aircraft models. "When ABS was introduced, it was only fitted as optional equipment on high-end luxury models,” Herbert Hemming, executive vice president of the Bosch Chassis Systems Control division said in an interview. "Now it is standard across all new vehicles within the European Union and in many parts of the world. ABS has made braking safer, and has therefore made a major contribution to reducing accidents.” ABS was first offered in 1978, and it was Bosch’s most-coveted brainchild. It was introduced as a product weighing just a little over 6 kilograms, but today—they are offering units that weigh only 1.4! This is probably to counter the trend in electronic braking systems. Either way, car drivers must make sure to prioritize efficiency over anything else.
ABS, is installed in automobiles to upgrade the car’s brake system. What it does is it prevents wheels to get jammed up when the driver suddenly depresses the brake pedal. Since the wheels are not locked up, the driver is allowed to maneuver the vehicle out of potential danger, like running over a cliff. However, how is this braking system possible? Each tire has a wheel speed sensor that monitors sudden changes when braking. When this sensor notices a speed difference of three miles per hour in a wheel or two, the ABS will immediately loosen up the pressure on the wheel/s, thus preventing any lock up or stuck up. A concrete is example is when the slippery road caused the vehicle to veer toward a cliff. Rationally, the driver will depress the brake pedal hastily from much panic. Moving away from the cliff, however, is very tricky especially when the wheels are jammed up. This is where the ABS comes in as it loosens up a wheel or two in order for the vehicle to be steered away from the cliff. Without a doubt, ABS is one of the ingenious car brake technologies most vehicles are equipped with. With this geared in a vehicle, the passengers are given with much peace of mind when driving during this time of the year.
At last, I must awoke that brakes are the closest to failsafe installed on a car. They give drivers a tight rein of car operations. A defective brake system can greatly compromise car safety. Loss of braking power is not the only thing a driver ought to be on the lookout for. In most cases, a car can have an ostensibly up to specs braking power but still have a criminally busted brake system.
Posted By: Elva Zhang
Web: http://www.ibuyautoparts.com
Contact: e-mail
| Another articles posted by Elva Zhang: |
|
|
|
|
|
